Their finishing products come in a variety of colors ranging from black, blue, and brown, to grey, pink, and more. I tried using Minwax Polycrylic and it was awful. I only did a small section before stopping and returning it to Home Depot.

This is an oxygen-crosslinking polyurethane that has a waterborne formula making it easy to use and durable. For finishes, polyurethane usually coats many different materials along with items such as furniture. I recently finished a dresser top in a very light gray oil based stain. Afterwards I applied a water based matte poly, because I didn’t want any yellow tint to show on the light gray color . Varathane provides more shine and prevents “yellowing.” However, it may peel off easily too. Like Minwax, Varathene is an oil-based as well as a water-based protective finish too.

What Is Polyurethane?

The possibilities of adding different fabric table runners in your colors could add interest and you could change it out whenever you wanted to. I’ve painted 12 cabinet doors, 8 cabinet drawers and have 9 doors to go. (Just kidding.) I sympathize with your paint frustrations. Today’s reformulated paints are harder to use than they used to be.

minwax vs varathane

It is so durable that it emulates professional polyurethane without the hefty price tag or inconvenience of hiring someone to cover your wooden furnishings for you. This polyurethane comes with UV stabilizer properties that will prevent sun damage. I have minwax vs varathane used GF Flat on top of this cabinet and yes, it did slightly yellow. It really depends on what you do to prep your piece and what type of surface your painting. On the other hand, if there is no bleed through or staining, it could be perfectly fine.

Advantages Of Oil

Maybe you could skip wood altogether and go for a metal base and a glass top? Might keep the room lighter and brighter without having to worry about wood tones. I did love the buffet when it was painted coral.

  • After it has dried and cured, sand it and apply two more layers.
  • I’ve painted when it was dry outside and when it has been raining.
  • Water based products dry very quickly and maintain the original, natural color of the wood.
  • As a one-component solution, Bona Mega doesn’t call for any aftermarket additives or hardeners.

But on hot days when the skinning-over occurs faster and traps the bubbles, you may need to help the popping along by “tipping-off” using your brush. Brush lightly back over the finish right after application. (You should do this anyway to line up the brush strokes with the grain.) Most of the bubbles will disappear. And those who believe this have come up with the idea of thinning the finish.

First, I don’t care what type of stain or pre-stain conditioner, it never turns out like it’s supposed to. Either the color turns a funky color once it’s polyurethaned, or the color is splotchy and uneven. Overall, polyurethane is generally used for indoor household projects like bookshelves and desks, while varnish is popular for outdoor surfaces such as a deck.

A few nails or screws into the good wood will ensure that the Bondo plug never comes out. Thanks for the heads up on that; I may try it on a project where there’s no need to apply paint for a couple of days. We are proud of the quality of our products, and we stand behind them 100%.

It dries quickly which can be a bit tricky at times but also means you can begin top coating in just a few hours. This post does contain affiliate links to help you find the products I mention in the post. Any affiliate earnings go to support more fun projects for this blog 🙂 To see my full disclosure policy click here. I’ve been thinking a stain post was in order for a while now, but I was testing out a newer product and wanted to make sure I was very comfortable with it before I shared . So in this post I want to talk about 3 different kinds of stain and the pros/cons/usage of each one. We’re going to talk Gel Stain, Water Based Stain and Oil Stain.

Honestly, I haven’t used it on teak; but I think it would be really oily. But if you want to make sure that you’re using the right product on your material, you could always ask your local hardware store minwax vs varathane for advice. Tell them the project you’re doing, the type of material used, the purpose of the material, etc. In using either of them, you need first to consider the material to which you will apply it.

Oil Vs Water Based Polyurethane

For this reason, polyurethane is more susceptible to peeling and cracking when exposed to heat or the elements. This product is often employed in treating weathered wood because it absorbs into the surface. Through absorption, lacquer forms a stronger bond with the wood that is harder to break. Whether you’re an amateur or expert, you should know that wood is an absorbent material. Pour water on it, and it will penetrate the material sooner or later.

Polyurethane is the protective coating for hardwood floors and the brand of polyurethane will have a huge impact on the durability and aesthetic properties of your floors. In this article, I am going to walk you through the best grade polyurethane products available for the best results. Most polyurethane is made to be painted onto wooden surfaces, but there are some other types available. You will want to make sure that you are able to use the polyurethane you have chosen and have the right tools on hand. Using polyurethane is very important for your wooden surfaces and furniture, so you need to make sure that you are able to apply it well. Being able to apply polyurethane yourself will save you time and money instead of having to rely on a professional.

The next coat of finish still bonds in the pores even though the finish there is rarely scuffed. Adding Penetrol to polyurethane slows its drying so dust has more time to settle and stick to the finish. Any possible gain in reduced brush marking is more than cancelled out by the added dust nibs. When you apply polyurethane, you notice that it stays wet on the surface for a short time as the thinner evaporates. Then the finish goes into a tacky or sticky stage for an hour or longer. This is the length of time it takes for the oxygen-induced crosslinking to occur.

Author: Kay Burton